
Camera interfaces
Manta Hardware Installation Guide V4.1.0
45
Gigabit Ethernet port (MANTA)
This port conforms to the IEEE 802.3 1000BASE-T standard for Gigabit
Ethernet over copper. It is recommended that Cat 5e or Cat 6 compatible
cabling and connectors be used for best performance. Cable lengths up to
100 m are supported.
You can also use the Gigabit Ethernet port to provide Power over Ethernet
(PoE) to the camera. Power must be compliant to IEEE 802.3at.
Status LEDs (MANTA)
The color of the LEDs have the following meaning:
Note
There is no Gigabit Ethernet cable provided with the camera.
For accessories contact customer care:
See Chapter Contacting Allied Vision Technologies on page 4.
LED color Status
Solid orange Ethernet link with 1 Gbit/s
established
Flashing orange Ethernet activity with 1 Gbit/s
Table 4: Status LED1
LED color Status
Solid green Ethernet link with 100 Mbit/s
established
Flashing green Ethernet activity with 100 Mbit/s
Table 5: Status LED2
LED color Status
Solid green Camera is powered (HIROSE or PoE)
LED off No power
Table 6: Status LED3: PoE cameras only and
Manta G-145-30fps / Manta G-201-30fps (non PoE)
Comentários a estes Manuais