Allied Manta Manual de Instruções descarregar pdf (Página 100)

Manta Technical Manual V7.2.0

100

Camera interfaces

Camera I/O connector pin assignment (incl. PoE)

The General Purpose I/O port uses a Hirose HR10-10R-12PA(73) connector on

the camera side. The mating cable connector is Hirose HR10A-10P-12S.

Note



From serial number 503323258 onwards all Manta models

including PoE and board level versions contain the same main

board:

• All I/O circuits have the same properties.

•For Manta models with serial number ≤ 503323258:

see Camera I/O connector pin assignment on page 159.

Pin Signal Direction Level Description

1 Camera GND In GND for RS232 and

ext. power

Ground for camera

power supply and RS232

2 Camera Power In 8–30 V DC Camera power supply

3Video Type

Auto Iris Out

Out --- Video type auto iris

( FW 1.44)

4 In 1 In Standard and PoE cameras:

(high) = 3–24 V

up to 36 V with external

resistor of 3.3 k in series

(low) = 0–1.0 V

Input 1 (SyncIn1)

5 --- --- --- ---

6 Out 1 Out Open emitter, max. 10 mA Output 1 (SyncOut1)

7 Isolated IO

GND

In/Out Common GND for In/Out Isolated input and out-

put signal ground

8 RxD RS232 In RS232 Terminal receive data

9 TxD RS232 Out RS232 Terminal transmit data

10 Isolated Out

Power

In Common VCC for outputs

max. 30 V DC

Power input for

opto-isolated outputs

11 In 2 In Standard and PoE cameras:

(high) = 3–24 V

(low) = 0–1.0 V

Input 2 (SyncIn2)

12 Out 2 Out Open emitter, max. 10 mA Output 2(SyncOut2)

Table 36: Camera I/O connector pin assignment

Note



Read all Notes and Cautions in the GigE Installation Manual

before using the I/O connector.

Note



The cable side Hirose connector is available for purchase

from Allied Vision.

P/N: K7600040

1211

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 162 163

Comentários a estes Manuais

Sem comentários

Allied Manta Manual de Instruções Página 100

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras bridge Allied Manta