Allied Manta Manual de Instruções descarregar pdf (Página 107)

Manta Technical Manual V7.2.0

107

Camera interfaces

Control signals

The inputs and outputs of the camera can be configured by software. The differ-

ent modes are described below.

Inputs

Input/output pin control

All input and output signals running over the camera I/O connector are con-

trolled by the I/O strobe commands. See GigE Features Reference document for

more details.

Outputs

Output features are configured by software. Any signal can be placed on any

output. The main features of output signals are described below:

Figure 82: Input block diagram

Signal Description

GPO Configured to be a general purpose output, control of which is assigned to

SyncOutGpoLevels

AcquisitionTriggerReady Active once the camera has been recognized by the host PC and is ready to start

acquisition

FrameTriggerReady Active when the camera is in a state that will accept the next frame trigger

FrameTrigger Active when an image has been initiated to start. This is a logic trigger internal

to the camera, which is initiated by an external trigger or software trigger

event

Exposing Active for the duration of sensor exposure

Table 45: Output signals

Polarity

selectable

via software

Input state

Input signal

Optocoupler

LP ﬁlter

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 162 163

Sem comentários

Allied Manta Manual de Instruções Página 107