
Manta Technical Manual V7.2.0
31
Specifications
Manta G-033B/C
Feature Specification
Resolution 656 x 492
Sensor SONY IT CCD ICX414AL/AQ with HAD microlens
Type CCD Progressive
Sensor size Type 1/2
Cell size 9.9 m
Lens mount C / CS-Mount
Max frame rate at full resolution 88 fps
Max image bit depth 12 bit
On-board FIFO 32 MByte, up to 99 frames at full resolution, Mono8/Bayer8, and a
GevSCPSPacketSize = 8192 bytes per packet
Mono formats Mono8, Mono12Packed, Mono12
Color formats BayerRG8, BayerRG12Packed, BayerGR12, Mono8, RGB8Packed,
YUV411Packed, YUV422Packed, YUV444Packed, BGR8Packed,
RGBA8Packed, BGRA8Packed
Exposure control 26 µs to 60 s; 1 µs increments
Gain control 0–35 dB
Binning Horizontal: 1 to 8 columns; Vertical: 1 to 14 rows
Decimation Horizontal and Vertical: 1, 2, 4, 8 factor
Opto-coupled I/Os 2 input, 2 outputs
RS-232 1 TxD, 1 RxD
Voltage requirements 8–30 VDC, or PoE
Power consumption 3.6 W @ 12 VDC, 4.2 W PoE
Trigger latency* Idle state: 8.6 µs
Frame valid state: 19.1 µs
Trigger jitter* Idle state: 4.8 µs
Frame valid state: 15.3 µs
Operating temperature +5°C to +45°C ambient temperature (without condensation)
Storage temperature -10°C to +70°C ambient temperature (without condensation)
Body dimensions (L x W x H) 86.4 mm x 44 mm x 29 mm including connectors, w/o tripod and lens
Mass 200 g (without lens)
Hardware interface standard PoE, IEEE 802.3af 1000BASE-T, 100BASE-TX
Software interface standard GigE Vision Standard 1.2
Camera control interface GenICam V1.0 compliant
Regulatory CE, FCC Class B, RoHS (2011/65/EU)
*It is possible to start the exposure of the next frame while the previous frame is read out:
– Idle state: sensor is ready and camera is idle, waiting for the next trigger
– Frame valid state: sensor is reading out and camera is busy. If the next frame is requested by an
external trigger in this state, higher latency may occur as compared to the Idle state
Table 5: Manta G-033B/C camera specifications
Comentários a estes Manuais